FROM $4,140

or from $24 pw*

Make your choice! Choose between:
480, 483, 484 or 485 camshaft.

✅ A.P.E Exclusive Camshaft
✅ Cam Bearing
✅ High-Capacity Lifters
✅ Billet Lifter Cuffs
✅ Adjustable Pushrods
✅ Cam Install Gasket Kit
✅ High-Flow Injectors
✅ 55mm Intake Manifold

FULLY INSTALLED & DYNO TUNED

Prerequisite: Stage 1 required
(Air Cleaner, Exhaust, Tuning device)

FROM $5,150

Already have an A.P.E. Power Plus Kit installed and want MORE POWER?

Upgrade to a 124”, 128" or 131”. Our best 'Bang for Buck' option for your M8 engine!

✅ A.P.E. EXCLUSIVE BIG BORE KIT (4.250" Black Wrinkle with Highlighted Fins – Heavy Duty Bolt-On Cylinders, A.P.E 128 Pistons, Cometic MLS Head and Base Gaskets)
✅ S&S Head Bolts
✅ Heavy Duty Clutch Springs
✅ Cam Service Gasket Kit
✅Custom Black Edition APE Pistons
✅Cometic MLS Head & Base Gaskets

BLACK EDITION APE PISTONS – BUILT FOR SERIOUS POWER 
✅ArmorX coating on piston crown, ring grooves & pin bore for superior protection and reduced wear under extreme conditions
✅ArmorFit skirt coating to reduce friction and engine noise
✅Oversized valve reliefs to suit +2mm valves and high-lift camshafts
✅Increased piston compression height - most pistons sit .010”–.015” below deck; added comp height often eliminates the need for cylinder machining
✅Premium quality piston rings included

FULLY INSTALLED & DYNO TUNED

Note: Must have APE Power Plus Cam Kit previously installed to upgrade to this Stump Puller Kit.

FROM $7,040

or from $39 pw*

Choose between a 124", 128" or 131” Kit and A.P.E Camshaft.

Our most popular 'Bang for Buck' option for upgrading your M8!

✅ A.P.E. EXCLUSIVE BIG BORE KIT (4.250" Black Wrinkle with Highlighted Fins – Heavy Duty Bolt-On Cylinders, A.P.E 128 Pistons, Cometic MLS Head and Base Gaskets)
✅ Choice of A.P.E Cam
✅ Full Compliment Cam Bearing
✅ Heavy Duty Lifters
✅ 55mm Performance Intake Manifold
✅ 6.2gps Injectors
✅ S&S Head Bolts
✅ Heavy Duty Clutch Springs
✅ Cam Service Gasket Kit

FULLY INSTALLED & DYNO TUNED

Note: 2017-2019 Models require the MY20 New 8 Lobe Scavenge Oil Pump.
(Purchased Separately)

JUST $10,900

or from $57 pw*

Super smooth power delivery and massive low-end torque.

Easy on the valve train, pump gas friendly, and guaranteed to put a smile on your dial.

✅ A.P.E. 4.250″ Big Bore kit
✅ Warflow Ported Cylinder Heads, stock valves, high lift springs
✅ A.P.E. CR515 cam
✅ Cam bearing
✅ CR50 Billet Lifter cuffs
✅ High Capacity Lifters
✅ Adjustable pushrods
✅ Cam install gasket kit
✅ Top End Gasket kit
✅ S&S Head bolts
✅ 6.2gps injectors
✅ SE 64mm throttle body with ported intake manifold
✅ SE 1275N springs

FULLY INSTALLED & DYNO TUNED

Prerequisite: Stage 1 required
(Air Cleaner, Exhaust, Tuning device)